Fewer units, faster installation. Introducing a new stormwater solution built around the contractor.
Module 20 Series
The new StormTank Module 20 Series is a subsurface stormwater storage unit rated for use under standard load applications, such as parking lots and athletic fields. Created for project professionals to achieve quick turnaround, the Module 20 Series was designed with the contractor in mind.
The Module 20 Series’ larger, simplified design allows for quick assembly and requires fewer total units needed for a project without sacrificing storage capacity, reducing installation time and labor costs.
NOT YOUR AVERAGE CRATE SYSTEM
Fully-factored HS-20 load rating
Extensively tested in a full-scale installation setting
Simple to assemble, install, and clean
Available in three heights: 18-, 24-, and 36-inch
Nominal footprint: 21″ x 42″
The Module 20 Series' simplified design can be assembled in under 90 seconds.
The Module 20 Series covers a greater volume without increasing overall footprint, resulting in fewer total Modules required to be installed.
With fewer total units needed, material and labor costs are lowered, reserving project resources.
Storm Tank offers support during the design, review, and construction phases of the Module system. StormTank modules are delivered to the site as palletized components requiring simple assembly. No special equipment, tools, or bonding agents are required; only a rubber mallet.
We recommend that the installing contractor contact either StormTank or the local distributor prior to installation of the system to schedule a pre-construction meeting. This meeting will ensure that the installing contractor has a firm understanding of the installation instructions.
Brentwood offers limited express product warranties. The StormTank product line is engineered to meet the most stringent industry performance standards and provide a flexible solution for varying project demands. Utilized for infiltration, detention, reuse, and pretreatment purposes, StormTank products offer a quality, cost-effective, and sustainable solution for stormwater management.
StormTank systems use a number of best-in-class resources to provide detailed CAD drawings and stormwater system modeling. CADdetails is a repository of many technical drawings, while HydroCAD and and Hydrology Studio offer software solutions for modeling stormwater runoff and designing stormwater management systems using StormTank products. These resources allow you to design and analyze a system based on your project’s unique application requirements.